Home > Streamstar SW > Supported Hardware > bluefish444 (Information can be found on the bluefish444 website)

bluefish444 (Information can be found on the bluefish444 website)

Information about the cards can be found on the bluefish444 website:

EPOCH | NEUTRON

EPOCH | SUPERNOVA CG

EPOCH | 4K SUPERNOVA S+

This cards has been tested with the Drivers/SDK version 5.11.0.50

Download drivers.

 

Installation and setting up the cards

  1. After installing the card into the PC, download and unzip the drivers
  2. Install driver by going into the BluefishOemDriver_V5_11_0_50_Win_7_8_10\driver directory and run BlueDriverInstall.exe
  3. Follow the install process for the card.
  4. After drivers are installed, go into Windows Device Manager and check, if you have the card fully working.
  5. Go into BuefishOemDriver_V5_11_0_50_Win_7_8_10\firmware folder and into the folder of your card.
  6. Cards can operate in various setups. Select the corresponding setup you want to use.
  7. After firmware update is finished, restart the PC.